Canon MX720 Series Скачать руководство пользователя страница 81

Страница: 81 / 248

Loading Documents in the ADF (Auto Document Feeder)

You can load documents to copy, fax, or scan in the ADF (Auto Document Feeder).

Note

To scan a document at optimum quality, load it on the platen glass.

Make sure that any original has been removed from the platen glass.

Load a document in the ADF.

(1)

Open the document tray.

(2)

Insert the document in the document tray until you hear a beep sound.

Load the document WITH THE SIDE TO SCAN FACING UP in the document tray.

Originals You Can Load

Note

When you set the alarm to be silent in

Sound control

Device user settings

, the alarm

will not beep even if the document is inserted in the document tray.

Device user settings

(3)

Adjust the document guides to match the width of the document.

Do not slide the document guides too hard against the document. The document may not be fed
properly.

Содержание MX720 Series

























































































































































































































































Результаты поиска

Содержание MX720 Series

Отзывы:

Canon MX720 Series, Онлайн-руководство, Страница: 81 / 248

Результаты поиска

Содержание MX720 Series

Отзывы: