Canon MX520 series, Онлайн-руководство

Страница: 936 / 953

Depending on the copy menu, some setting items cannot be selected. This section describes
the setting items in Standard copy .
The setting item which cannot be selected is displayed grayed out.
For details on the setting items for
Photo copy , see Copying Photos .
Some settings cannot be specified in combination with the setting of other setting item or the
copy menu. If the setting which cannot be specified in combination is selected, Error details is
displayed on the LCD. In this case, press the left Function button to confirm the message, then
change the setting.
The settings of the page size, media type, etc. are retained even if the machine is turned off.
When copying starts in the copy menu that is not available with the specified setting,
The
specified function is not available with current settings. is displayed on the LCD. Change the
setting, following the on-screen instructions.
1. Magnif. (Magnification)
Specify the reduction/enlargement method.
Reducing or Enlarging a Copy
2. Intensity
Specify the intensity. When Auto is selected, the intensity is adjusted automatically according to
the originals loaded on the platen glass. Auto is displayed on the Copy standby screen.
Note
When Auto is selected, load the original on the platen glass.
3. Page size
Select the page size of the loaded paper.
4. Type (Media type)
Select the media type of the loaded paper.
5. Print qlty (Print quality)
Adjust print quality according to the original.
Important
If you use Fast with Type set to Plain paper and the quality is not as good as expected,
select Standard or High for Print qlty and try copying again.
Select High for Print qlty to copy in grayscale. Grayscale renders tones in a range of
grays instead of black or white.
6. Layout
Select the layout.
Copying Two Pages to Fit onto a Single Page
Copying Four Pages to Fit onto a Single Page
7. 2-sidedPrintSetting
Select whether to perform two-sided copying.
Two-Sided Copying