manualshive.com logo in svg

Canon MX520 series, Онлайн-руководство

Поделиться
Скачать
Canon MX520 series Скачать руководство пользователя страница 676

6.

Press the 

Color

 button for color transmission, or the 

Black

 button for black & white

transmission.

The machine starts scanning the document.

Important

Color transmission is available only when the recipient's fax machine supports color faxing.
Do not open the document cover until scanning is completed.

7.

Start sending.

•

If you load the document in the ADF:

The machine scans the document automatically and starts sending the fax.

Note

To cancel a fax transmission, press the 

Stop

 button. To cancel a fax transmission while it

is in progress, press the 

Stop

 button, then follow the instructions on the LCD.

If documents remain in the ADF after the 

Stop

 button is pressed while scanning is in

progress, 

Document in ADF. Close the feeder cover and select 

 to eject document.

is displayed on the LCD. By pressing the 

OK

 button, the remaining documents are

automatically ejected.

•

If you load the document on the platen glass:

The 

Placing documents (platen)

 screen appears on the LCD after scanning each sheet of

document.

To send the scanned document, press the 

OK

 button to start sending it.

Note

To send two or more pages, follow the message to load the next page, and press the

Color

 or 

Black

 button. After scanning all pages, press the 

OK

 button to start sending.

To cancel sending the fax, press the 

Stop

 button.

Note

When your machine is connected to a PBX (Private Branch Exchange) system, refer to the operating

instructions of the system for details on dialing the recipient's fax/telephone number.

In case the machine was not able to send a fax, such as when the recipient's line was busy, it has the

function to automatically redial the number after a specified interval. Automatic redialing is enabled by
default.

Automatic Redialing

Unsent documents, such as those pending redial, are stored in the machine's memory. They are not

stored in the case of a sending error.

Document Stored in Machine's Memory

Do not disconnect the power plug until all documents are sent. If you disconnect the power plug, all

unsent documents stored in the machine's memory are lost.

Содержание MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды