manualshive.com logo in svg

Canon MX520 series, Онлайн-руководство

Поделиться
Скачать
Canon MX520 series Скачать руководство пользователя страница 900

Mobile phone print settings

7.

Start printing from a mobile phone.

•

For the device name, select the default value "Canon XXX-1" (where "XXX" is your machine's
name).

•

If you are required to input a passkey, input the default value "0000".
You can change the device name of the machine, passkey, and so on from the 

Bluetooth

settings

 screen.

Setting Bluetooth Printing

Note

Communication is possible in a range of up to about 33 ft. / 10 m depending on the conditions

below. Printing speed may vary depending on the following conditions:
Presence of obstacles between the communication equipment, and radio conditions.
Presence of magnetic fields, static electricity, or electromagnetic interference.
Receiver sensitivity and antenna performance of the communication equipment.

Video files cannot be printed.
Depending on your mobile phone, data saved on a memory card may not be printed.

About transmittable data

Due to security settings on the mobile phone, downloaded content or photos downloaded

from a URL attached to an E-mail cannot be printed.

Depending on the size of a photo, it may take a while for this machine to start printing after

starting wireless communication.

Printed quality and orientation (portrait or landscape) are determined automatically

according to the shot photo size.

Depending on the photo size shot on the mobile phone, the edges of the image may be cut

off when performing borderless printing; the margin size may change when printing with
borders.

If the photo file is over 1.8 MB in size, it may not be possible to send the file.

Содержание MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды