Canon MV5iMC Скачать руководство пользователя страница 160

Страница: 160 / 181

160

ditional

Inf

ormation

• AV/PHONES is not set to AV in the

menu.

• AV

DV OUT (Analog-digital

converter) is not set to OFF in the
menu.

• The video heads need cleaning

(

155).

• The TV/VIDEO selector on the TV

isn’t set to VIDEO (

33-35).

• The speaker has been turned off with

the selector dial (

31).

• Headphones are being used.

There’s no picture on the TV
screen.

There’s no picture on the TV
screen, even though the tape is
moving.

There’s no sound coming from the
speaker during playback.

Memory card operations

MV5i MC

Cause and/or what to do about it

• It is not turned the right way

(

107). Turn it the right way and

try inserting again.

• Turn the camcorder's power off and

back on again and remove and
reinsert the card. If the mark
continues to flash, format the
memory card.

• The camcorder is not set to CARD

CAMERA or CARD PLAY (VCR)
(

112, 122) mode.

• The memory card is not inserted

(

107).

• You are using an SD Memory Card and

it is set for erasure prevention. Change
the position of the protect switch.

• The memory card is full. Erase

images (

126) or insert a new

memory card.

• The power source is not properly

connected, or the battery pack is
exhausted or not properly attached
(

12-15, 151).

• The function cannot be used in that

recording program (

57).

Problem

The memory card will not insert.

The

mark flashes red in the

display even though a memory
card has been inserted.

Nothing happens when I press the
buttons.

#6_ MV5/MV5i/MV5i MC_E(150-180) 02.4.17 7:20 PM Page 160

Содержание MV5iMC






















































































































































































Результаты поиска

Содержание MV5iMC

Отзывы:

Похожие инструкции для MV5iMC

Бренды по названию

Популярные бренды

Canon MV5iMC, Инструкция по эксплуатации

Результаты поиска

Содержание MV5iMC

Отзывы:

Похожие инструкции для MV5iMC

Бренды по названию

Популярные бренды