Canon MK3000 Скачать руководство пользователя страница 177

Страница: 177 / 203

173

What to Do in Case of Trouble

Problem

Cause/Things to Check

Solution

The power does not turn
on.

Check that the AC adapter
and power cord are properly
connected.

After confi rming that the AC
adapter and power cord are
connected, insert the power
plug fi rmly into the power
outlet.

Are you using the supplied AC
adapter (PR-TP001) and power
cord?

Do not use anything other than
the supplied AC adapter (PR-
TP001) and power cord. Failure
to do so may result in fi re,
electric shock, or malfunction.

Are the batteries installed in
the wrong direction?

Make sure that all batteries
are installed correctly in the
direction marked on the inside
of the battery case.

Are the batteries low?

Replace the batteries or use the
included AC adapter (PR-TP001).

Are batteries other than the
specifi ed ones being used?

Use the specifi ed batteries.

(P.13)

The display does not
change to the AC adapter
symbol even after the AC
adapter is loaded.

Check that the AC adapter
and power cord are properly
connected.

Turn off the power, make sure
the AC adapter and power cord
are connected, and then insert
the power plug fi rmly into the
power outlet.

The remaining battery
charge is not displayed
correctly.

If you load batteries that
are not fully charged, the
remaining battery charge may
not be displayed correctly.

Use fully charged batteries.

Содержание MK3000












































































































































































































Результаты поиска

Содержание MK3000

Отзывы:

Похожие инструкции для MK3000

Бренды по названию

Популярные бренды

Canon MK3000, Руководство пользователя

Результаты поиска

Содержание MK3000

Отзывы:

Похожие инструкции для MK3000

Бренды по названию

Популярные бренды