Canon MK3000 Скачать руководство пользователя страница 160

Страница: 160 / 203

156

Replacing the Cutter

If the tube or label tape does not cut properly even after adjusting the depth and motion of the
cutter, replace the cutter. Also, when replacing the cutter, replace the blade receiver at the same
time.

CAUTION

• The cutter is designed so that it cannot be touched directly, but if it is handled

improperly, the blade may pop out and cause injury. Never perform any operation
that is not described in this manual.

• Do not leave replaced parts unattended. If they come into contact with the hands of

children, they may cause injury.

• When replacing the cutter, be sure to turn off the power.

IMPORTANT

• It is best to replace the cutter after about every 50,000 cuts. (When using PVC tube with an inner

diameter of ø3.2 mm)

• Dispose the removed cutter and blade receiver according to local government regulation.

NOTE

• The Mounted Cutter Count is counted regardless of the print media being used. Also, any cutter

operations performed while printing with the cutter removed will also be counted in the Mounted

Cutter Count.

Содержание MK3000












































































































































































































Результаты поиска

Содержание MK3000

Отзывы:

Похожие инструкции для MK3000

Бренды по названию

Популярные бренды

Canon MK3000, Руководство пользователя

Результаты поиска

Содержание MK3000

Отзывы:

Похожие инструкции для MK3000

Бренды по названию

Популярные бренды