Expand Serial Command Specification
Page 22 of 46
8.6.2. CF_SOURCE Command
Command “CF_SOURCE_%1” [CR]
Input: 1
“DIGITAL” ---------- Select DVI Digital Input
“ANALOG” -------- Select Analog Input
“SCART” ----------- Select Scart Input
“HDCP” ------------- Select DVI HDCP Input
“OUT” ---------------- Select Monitor Out
Input: 2
“VIDEO” ------------- Select Composite Video Input
“YPBPR” ------------ Select Y/Pb/Pr Input
“ANALOG” --------- Select RGB Input
Input: 3
“VIDEO” ------------- Select Composite Video Input
“S-VIDEO” -------- Select S-Video Input
“YPBPR” ------------ Select Y/Pb/Pr Input
%1
Input: 4
Not select source (Network only)
Details
Select current selected Input sauce. (Only valid when it is in the usual Power
On state)
When selected Input does not meet the requirement for the specified %1, the
response will be “101” and the Command is not be executed.
Acceptable
“000” [CR]
Response
Unacceptable “%%%” [CR]
8.6.3. CF_INPUT1 Command
Command “CF_INPUT1_%1” [CR]
%1
“DIGITAL” -------- Select DVI Input
“ANALOG” ------- Select Analog Input
“SCART” ---------- Select Scart Input
“HDCP” ----------- Select DVI HDCP Input
“OUT” ------------- Select Monitor Out
Details
Select Input-1 and specified source by %1 at the same time. (Only valid when it
is in the usual Power On state)
Note) When Input1 is set to Monitor OUT, the Command is valid and response
is error code, “101”.
Acceptable
“000” [CR]
Response
Unacceptable “%%%” [CR]
8.6.4. CF_INPUT2 Command
Command “CF_INPUT2_%1” [CR]
%1
“VIDEO” ------------- Select Composite Video Input
“YPBPR” ------------ Select Y/Pb/Pr Input
“ANALOG” --------- Select RGB Input
Details
Select Input-2 and specified source by %1 at the same time. (Only valid when it
is in the usual Power On state)
Acceptable
“000” [CR]
Response
Unacceptable “%%%” [CR]