Expand Serial Command Specification
Page 9 of 46
5. Functional Execution Command Table
5.1 Image Series Command Table
Execute command
Item
CF_BRIGHT_%1 [CR]
Set Brightness value
CF_CONT_%1 [CR]
Set Contrast value
CF_COLOR_%1 [CR]
Set Color value
CF_TINT_%1 [CR]
Set Tint value
CF_SHARP_%1 [CR]
Set Sharpness value
CF_GAMMA_%1 [CR]
Set Gamma value
CF_WBAL-R_%1 [CR]
Set White Balance Red vakue
CF_WBAL-G_%1 [CR]
Set White Balance Green value
CF_WBAL-B_%1 [CR]
Set White Balance Blue value
CF_COLTEMP_%1 [CR]
Set Color Temp. value
CF_NZRED_%1 [CR]
Set or cancel for Noise Reduction
CF_PROGV_%1 [CR]
Set or cancel for Progressive
CF_IMAGE_%1 [CR]
Set Image mode
CF_IMAGEADJ_%1 [CR]
Reset or store for Image adjustment
CF_APCTRL_%1 [CR]
Set Auto Picture Control
CF_COLMNSAV_%1 [CR]
Store current color management setting status
CF_COLMNLD_%1 [CR]
Call color management setting status
CF_TURBO_%1 [CR]
Control Turbo Bright
5.2. PC Control Command Table
Execute command
Item
CF_FSYNC_%1 [CR]
Set Fine Sync. value
CF_TDOTS_%1 [CR]
Set Total Dots value
CF_CLAMP_%1 [CR]
Set Clamp value
CF_H-POS_%1 [CR]
Set Horizontal Position value
CF_V-POS_%1 [CR]
Set Vertical Position value
CF_DDOTS_%1 [CR]
Set Display Dots value
CF_DLINE_%1 [CR]
Set Display Line value
CF SETPCADJ [CR]
Reflect the setting value on the image
CF_ORGMODE_%1 [CR]
Specify serial for PC mode
CF_PCSTORE_%1 [CR]
Store current PC Adj. status to Mode 1, 2, 3, 4, or 5.
5.3. Input Control Command Table
Execute command
Item
CF_INPUT_%1 [CR]
Select Input
CF_SOURCE_%1 [CR]
Select Input source
CF_INPUT1_%1 [CR]
Select Input-1 and also set source to %1 at once
CF_INPUT2_%1 [CR]
Select Input-2 and also set source to %1 at once
CF_INPUT3_%1 [CR]
Select Input-3 and also set source to %1 at once
CF_INPUT4_%1 [CR]
Select Input-4 and also set network
CF_SYSTEM_%1 [CR]
Select System
