Expand Serial Command Specification
Page 17 of 46
8.4.11. CF_IMAGE Command
Command “CF_IMAGE_%1” [CR]
When Input
is Computer
“STAND” --------- Standard
“REAL” ----------- High contrast
“CUSTOM1” ---- Custom (The value which is adjusted and saved
by a user)
%1
When Input
is Video
“STAND” --------- Standard
“CINEMA” ------- Cinema
“CUSTOM1” ---- Custom (The value which is adjusted and saved
by a user)
Details
Select Image mode. (When it is in usual Power On state, this is valid)
Parameter “CUSTOM1” is the same as selecting Custom on OSD menu. The
value set by this Command is stored in EEEPROM. When All Off the Projector,
the setting will
valid.
Acceptable
“000” [CR]
Response
Unacceptable “Error Code” [CR]
8.4.12. CF_IMAGEADJ Command
Command “CF_IMAGEADJ_%1” [CR]
%1
“RST” ------------- Reset Image adjustment
“STR1” ------------ Store current Image adjustment to Custom
Details
Reset and Store for Image adjustment. (When it is in usual Power On state,
this is valid)
“STR1” is the same as “Custom” when choosing “Store” on OSD menu.
The setting value set in “Custom” is stored, so even if the Projector is set to AC
Power Off and is turned on again, the setting value will be able to be back.
Acceptable
“000” [CR]
Response
Unacceptable “Error Code” [CR]
8.4.13. CF_APCTRL Command
Command “CF_APCTRL_%1” [CR]
%1
“L1” ------------- Select Auto Picture Control L1
“L2” ------------- Select Auto Picture Control L2
“OFF” ----------- Off Auto Picture Control
Details
Set Auto Picture Control. (Only valid when it is in the usual Power On state)
Acceptable
“000” [CR]
Response
Unacceptable “Error Code” [CR]
8.4.14. CF_COLMNSAV Command
Command “CF_COLMNSAV_%1” [CR]
%1
“000” ~ “009” -------- Specify store area
Details
Store current Color Management setting status to the area by %1 specification.
(Only valid when it is in the usual Power On state)
Acceptable
“000” [CR]
Response
Unacceptable “Error Code” [CR]