![background image](http://html1.mh-extra.com/html/canon/lv-7565/lv-7565_specification_4149439019.webp)
Expand Serial Command Specification
Page 18 of 46
8.4.15. CF_COLMNLD Command
Command “CF_COLMNLD_%1” [CR]
%1
“000” ~ “009” --------- Specify store area
Details
Call Color Management setting status from an area by %1 specification.
(Only valid when it is in the usual Power On state)
Acceptable
“000” [CR]
Response
Unacceptable “Error Code” [CR]
8.4.16. CF_TURBO Command
Command “CF_TURBO_%1” [CR]
%1
“ON” ------------ Set Bright SW to On
“OFF” ----------- Set Bright SW to Off
Details
Set Bright SW to the status by %1specification.
(Only valid when it is in the usual Power On state)
Acceptable
“000” [CR]
Response
Unacceptable “Error Code” [CR]
8.5. PC Control Series Command
8.5.1. CF_FSYNC Command
Command “CF_FSYNC_%1” [CR]
%1
“0000 ~ 0031” --------- Directly set Fine Sync setting value
“UP” ---------------------- Fine Sync setting value +1
“DN” ---------------------- Fine Sync setting value -1
Details
Set Fine Sync. (Only valid when it is in the usual Power On state)
The value set by this Command will not be saved to the Projector. Therefore,
when All Off the Projector, the value will return to the original setting. (Stand
by mode stays)
Note: When %1 is directly specified, this command is not enough to execute for
the screen. To show up on the image, issue CF_SETPCADJ Command.
Acceptable
“000” [CR]
Response
Unacceptable “101” [CR] ---- When Input is Video series
8.5.2. CF_TDOTS Command
Command “CF_TDOTS_%1” [CR]
%1
“nnnn ~ 9999” ----------- Directly set Total Dots value
“nnnn” means minimum value. This is the total value
of current Display Dots + Horizontal Position.
“UP” ------------------------ Total Dots setting value +1
“DN” ------------------------ Total Dots setting value -1
Details
Set Total Dots. (Only valid when it is in the usual Power On state)
The value set by this Command will not be saved to the Projector. Therefore,
when All Off the Projector, the value will return to the original setting. (Stand
by mode stays)
Note: When %1 is directly specified, this command is not enough to execute for
the screen. To show up on the image, issue CF_SETPCADJ Command.
Acceptable
“000” [CR]
Response
Unacceptable “101” [CR] ---- When Input is Video series