Canon LBP-1260, Руководство по обслуживанию

Страница: 86 / 218

CHAPTER 2
Status Indication display
umber
Description
23
MEMORY FULL
Download overflow
Take one of the following
The pattern data memory overflowed
because there was too much pattern
Press the ON LINE key to
data (downloaded data) for forming
data from the
user-defined characters (character font)
external device. The
sent from the external device to the
overflow pattern data Is
printer. invalid.
Stop printing [see Section
V of Chapter 1). then enter
data again in online mode.
If the error occurs
advise the customer to
check input data (erase
unnecessary downloaded
data. etc.) or add an
optional RAM SIMM. If a
hard drive is installed, ask
the customer to switch the
power OFF, about two
seconds. switch the power
ON, then download data
again.
26 MEMORY FULL
Work overflow When the ON LINE key
The function cannot be pressed, the error is cleared.
executed because of internal and the printer accepts data
memory (video controller). from the external device.
However. the function which
experienced an error cannot
be executed. Check whether
an optional SIMM has
been Installed. If not, advise
the customer to add a RAM
SIMM.
27 JOB REJECT Translator missing
Press ON LINE key so
The translator by the
the Job in the error
command from the external device does
occurred is skipped.
not exist. or command parameters are
document not be
not correct.
printed. but the
document be printed.)
Then add the
translator or correct the
command.
26 MEMORY FULL Drawing working memory overflow
the ON LINE key to
Since there are very complicated processing.
graphics on one page, they may not be the customer to add
printed correctly. an RAM SIMM.