Canon LBP-1260, Руководство по обслуживанию

Страница: 113 / 218

3
2.
31
Cleaning the photosensitive
Open the printer and remove the
cartridge.
Open the protective shield.
Liberally sprinkle toner on a piece of
flannel or other soft cloth and clean the
drum surface with it.
Notes: 1. Only turn the drum in the
direction that it turns during
printing. If you turn it back-
ward, the spring-loaded contact
that conducts the developing
bias to the inside rim of the
developing cylinder will be bent.
Do not touch the photosensitive
part of the drum while rotating
the drum.
2. Use flannel or some other soft
cloth to clean the drum surface.
Do not use lint-free paper
because it is too hard and will
scratch the surface. Never use
the solvents to clean the drum.
3. Finish as quickly as
possible to avoid exposing the
drum to light for a long time,
as
can cause abnormal
Images.
B.
Transfer
Charging
Roller
1) Open the printer.
2) Hook the left side of the transfer
charging roller shaft with the supplied
green
brush, and remove the
transfer charging roller.
Transfer charging roller
Figure 3-33
Notes: 1. Hold the transfer charging
shaft, not the sponge area.
Shaft
2. Use dry lint-free paper (produc-
ing paper dust] to clean the
transfer charging roller. Never
use solvents.
3. If paper dust or toner cannot be
removed from the transfer roller
with the lint-free paper, or if the
roller is deformed, change the
roller for a new one.
3-13