Canon LBP-1260, Руководство по обслуживанию

Страница: 26 / 218

CHAPTER
1
The PCL MENU contains the most commonly used options. You can override or change
all options in thls menu through your software application. The changes you make through the
operator panel become the permanent default settings.
P r i n t
option
(Press Factory
MENU) default Description (Press A or
COPIES 1 Selects the number of copies (from to 99) you want to print.
FNT
SOURCE
Selects the font source. You can select:
Internal fonts
Permanent font
You see the SOFT option only if permanent soft fonts are
downloaded.
FNT 0
NUMBER
PITCH 10.00
SIZE 12.00
If you do not know the font source and font number, you can print a
Font List. The option you specify here must match the alpha portion
of the Font # on the Font List, for internal or for soft. For more
information about printing this list, see the Printing the Font List
section.
Identifies the Font Number through 999) as listed on the Font
List. Make sure you use the Font not the Font ID.
Selects pitch sizes from 0.44 to 99.99 characters per inch in
scroll increments of 0.01. (Hold down the arrow key to
rapidly.) You can select a pitch if the font by FNT SOURCE
and NUMBER is a scalable typeface with The
LBP-1260 adjusts the height (point size) of the characters according
to the pitch you select.
Selects the point size from 4.00 to 999.75 points in
increments. The scroll increment is 0.25. You can select the point
size if the font indicated by SOURCE and FNT NUMBER is a
scalable font with spacing.
Point size is a measure of the height of a character in of an
inch. The LBP- 1260 adjusts the character’s horizontal spacing
according to the point