Canon LBP-1260, Руководство по обслуживанию

Страница: 136 / 218

4
C.
Before installing a new the
printer (or if blank spots appear on
prints during use. because of uneven toner
hold the cartridge horizontally
and slowly rock it each way about the
axis, or six times, as shown in
Figure 4-2. Thls will distrlbute the
toner evenly. Then install the cartridge
the printer. Using any other method
may result in toner leaking from the
developing unit or cleaning unit.
4-2
After installing a new cartridge, print
three to test patterns to check for
toner leakage.
Before moving the printer, take the
cartridge out, and put it into an
aluminum bag or pack It with thick
cloth to prevent exposure to light.
Keep cartridges away from computer
workstation, disk drives. and floppy
disks. The magnet in the cartridge can
corrupt the video data in the memory of
the workstation, or the data on disks.
4) Since the photosensitive drum is
sensitive to light. never expose it to
direct sunlight or strong light (1500
or more). If you do, blank spots or
black streaks may appear on
If this does happen, stop the printer for
a while; this will usually solve the
problem. If the cartridge exposed to
strong light for a long blank
or black streaks may appear on
prints even after stopping the printer.
5) Do not open the protective shield in the
bottom of the cartridge and touch the
surface of the photosensitive drum. If
the drum surface is clean with
flannel or some other soft cloth liberally
sprinkled with toner, Do not use dry
cloth, paper, or solvents.