Canon iR6570 series, Портативное руководство

Страница: 189 / 320

Chapter 5
5-39
<DENS>
T-5-21
<BLANK>
T-5-22
<V-CONT>
D-HV-DE
Use it to enter the offset value for the high-voltage D/A output
for the DC controller PCB.
adjustment range: -50 to 50 (default: 0)
1
TSPLY-ADJ
Use it to adjust the toner supply distribution (axial direction) for
the developing assembly.
adjustment range: 1 to 5 (default: 3)
2
COPIER > ADJUST > DENS
Sub-item Description Level
DENS-ADJ Use it to adjust the density of images (copier/printer).
Use it to correct the F-value table in the event of fading in a high-
density area or fogging in an image.
adjustment range: 1 to 9 (default: 5)
- to decrease fading, increase the value.
- to decrease fogging, decrease the value.
If you have initialized the RAM on the DC controller PCB, enter
the value indicated on the service label.
1
COPIER > ADJUST > BLANK
Sub-item Description Level
BLANK-T Use it to enter the image leading edge non-image width.
1
adjustment range: 1 to 500 (default: 118)
If you have initialized the RAM on the DC controller PCB or
replaced the PCB, enter the value indicated on the service label.
BLANK-B Use it to enter the image trailing edge non-image width.
1
adjustment range: 0 to 2362 (default: 23)
If you have initialized the RAM on the DC controller PCB or
replaced the PCB, enter the value indicated on the service label.
COPIER > ADJUST > DEVELOP
Sub-item Description Level