Canon iR6570 series, Портативное руководство

Страница: 101 / 320

0008 At time of start-up, the HDD fails to reach
a specific temperature within a specific
period of time.
- Replace the hard disk.
- Replace the DC controller PCB.
0009 At time of a sleep shift, the temperature is
below a specific level.
E610 The HDD encryption key is faulty. (hardware composition error, initialization error, ID
key error, ID processing error)
0001 There is no encryption board. - Check the hardware composition.
0002 The memory configuration is inadequate
for the use of encryption.
0101 The attempt to initialize the memory used
for storage of the key has failed.
- Turn off and then on the main power.
0102 The attempt to initialize the encryption
processing area has failed.
0201 There is an error in the encryption
processing area.
0202 There is an error in the encryption
processing area.
0301 The attempt to create an ID key has failed.
0302 A fault has been detected in the encryption
key.
- Turn off and then on the main power.
This error will reset all content on the
HDD.
0303 A fault has been detected in the encryption
key.
0401 An error has been detected at time of
coding.
- Turn off and then on the main power.
0402 An error has been detected at time of
decoding.
E674 There is a fault in the communication between the fax controller PCB (2-line) and the
main controller PCB.
0001 An attempt to set fax device mode has
failed.
- Check the connection of the cable
between the fax controller PCB (2-line)
and the main controller PCB.
- Replace the ROM DIMM of the fax
controller PCB (2-line).
- Replace the fax controller PCB (2-line).
- Replace the main controller PCB.
E710 There is a fault in IPC initialization.
Code Description Remedy