Canon iR6570 series, Портативное руководство

Страница: 59 / 320

Chapter 2
2-25
backward to adjust.
Backward: The side registration value (left margin)
is decreased.
Frontward: The side registration value (left margin)
is increased.
F-2-25
4) Make sure that the side registration values (left and
right margins) of a copy made from the front deck
left/right are L1 = 2.5±1.5mm respectively.
F-2-26
[1] Paper feed direction
5) Tighten the 2 screws [2] and 2 fixing screws [3] of
the deck front cover [1].
F-2-27
6) Put back the front deck left/right to the machine.
<Manual Feed Tray>
1) Move the side plates [1] to the center. Loosen the 2
mounting screws [2] of the manual feed tray, and
adjust the position of the manual feed tray.
F-2-28
<Duplexing Feeder Unit>
1) Select the following service mode COPIER >
ADJUST > FEED-ADJ > ADJ-REFE, and make an
adjustment so that margin on the 2nd side image
will be within specs.
F-2-29
2.2.4 Adjusting the Image
Leading Edge Margin
0008-7920
iR5570 / iR6570
1) Adjust the image margin in service mode so that it
is as indicated: COPIER> ADJUST> FEED-ADJ>
REGIST.
[1]
image
L1
[1]
[1]
[2]
[2]
[3]
[3]
[1]
2.5+/-2.0mm
Increase the value of
ADJ-REFE
(Margin is increased by
1mm with increase of 10) Decrease the value of
ADJ-REFE
(Margin is decreased by
1mm with decrease of 10)
0
2
4
6
8
10
0
2
4
6
8
10