Canon iR6570 series, Портативное руководство

Страница: 217 / 320

IDL-MODE Use it to select idle rotation mode for the developing assembly.
0: fix to low humidity mode (off)
1: environment control (default)
2: fix to normal temperature/humidity mode (idle rotation for 120
sec)
3: fix to high humidity mode (idle rotation for 300 sec)
4: power save mode
2
FSPD-S1 Use it to select fixing enhancement mode.
0: normal (default)
1: fixing enhancement mode
2: not used
2
TSPLY-SW Use it to switch over toner supply sequence.
0: environment control (default)
1: fix to low humidity mode (on for 1.4 sec, off for 1 sec)
2: fix to normal temperature/humidity mode (on for 1.5 sec, off
for 1 sec)
3: fix to high humidity mode (on for 3 sec, off for 2 sec)
2
SCANSLCT Use it to enable/disable the function used to compute the scan area
from the selected paper size.
setting
0: off (determine scan area by original detection)
1: on (determine scan area by paper size)
2
OHP-TEMP Use it to switch over control temperature for transparency mode.
setting
0: normal (default); 1: -5 deg C; 2: -10 deg C; 3: -15 deg C; 4: -20
deg C
2
SENS-CNF Use it to set the arrangement of original sensors.
setting
0: AB (default)
1: inch
2: A
2
RAW-DATA Use it to specify how received data should be printed.
If a received image has a fault, use this mode to find out if the fault
is in the data or in image processing.
setting
0: normal operation (default)
1: print as is
2
SHARP Use it to change the level of sharpness (median value).
setting: 1 to 5
2
COPIER > OPTION > BODY
Sub-item Description Level