Canon iR6570 series, Портативное руководство

Страница: 196 / 320

Chapter 5
5-46
<CCD>
T-5-33
COM-TEST Use it to check the connection to the server used for E-RDS.
Procedure
1) Select the item to highlight, and press the OK key.
2) See where a connection has been made. (The result will be
indicated as 'OK' or 'NG'.)
OK: connection possible; NG: connection not possible
1
COM-LOG Use it to indicate the details of the result of the communication test
executed for the server used for E-RDS.
Procedure
1) Select the item to highlight, and press [show info].
log information particulars: year, date, time, error code, error
detail (128 characters max.)
1
RGW-ADR Use it to specify the URL of the server used for E-RDS.
Procedure
1) Select the item to highlight, and press [show information].
2) When the URL input screen appears, enter the appropriate URL
and press the OK key.
(default: https://a01.ugwdevice.net/ugw/agnetif010)
1
COPIER > FUNCTION > CCD
Sub-item Description Level
CCD-ADJ Use it to execute CCD auto adjustment.
Procedure
1) Place about 10 sheets of paper (the whitest of all papers used by
the user, other than color print paper) on the platen glass.
2) Select <CCD-ADJ> to highlight, and press the OK key.
3) See that auto adjustment takes place (about 15 sec). During
adjustment, <ACTIVE> will be indicated.
4) See that the scanning lamp goes on twice during adjustment. At
the end, the screen will show <OK!>.
5) See that al items of service mode have been updated
(COPIER>ADJUST>CCD). Record the new settings on the service
label.
If you have replaced the CCD unit, scanning lamp, inverter PCB, or
platen board glass (standard white plate), be sure to execute this
mode item.
1
COPIER > FUNCTION > INSTALL
Sub-item Description Level