Canon iR2200 Series, Руководство по обслуживанию

Страница: 5 / 352

CONTENTS
3.6 The copy is foggy (entire face)
................................................. 4-13
3.7 The copy is foggy (vertical) ..... 4-14
3.8 The copy has a black line (vertical,
fuzzy, thick) ............................. 4-14
3.9 The copy has a black line (vertical,
fine) .......................................... 4-15
3.10 The copy has a white spot (vertical)
................................................. 4-16
3.11 The copy has a white line (vertical)
................................................. 4-16
3.12 The copy has a white spot (horizon-
tal) ............................................ 4-17
3.13 The back of the copy is soiled/
Soiled edge ............................... 4-18
3.14 The copy has a fixing fault ....... 4-19
3.15 The copy has a displaced leading
edge .......................................... 4-20
3.16 The copy has a displaced leading
edge (large margin) .................. 4-20
3.17 The copy has a displaced margin
(no margin) ............................... 4-20
3.18 The copy is blurred .................. 4-21
3.19 The copy is foggy (horizontal)
................................................. 4-22
3.20 The copy has inadequate sharpness
................................................. 4-23
3.21 The copy is completely blank
................................................. 4-24
3.22 The copy is completely black
................................................. 4-26
3.23 The copy has a block/white dot after
replacement of the drum unit
................................................. 4-27
3.24 The copy has a black line (stream
reading) .................................... 4-27
4 Troubleshooting Malfunctions ....... 4-28
4.1 Power Supply System .............. 4-28
4.1.1 The AC power is absent ..... 4-28
4.1.2 The DC power is absent
........................................... 4-29
4.2 Printer Unit .............................. 4-30
4.2.1 Pickup fails ........................ 4-30
4.2.2 The lifter fails to move up
(pickup from the cassette)
........................................... 4-31
4.2.3 The vertical path roller fails to
rotate .................................. 4-32
4.2.4 The registration roller fails to
rotate .................................. 4-32
4.2.5 Pickup from the multifeeder
tray fails (i.e., the pickup roller
fails to rotate) ..................... 4-33
4.2.6 Pickup from the multifeeder
tray fails (i.e., the multifeeder
holding plate fails to move up)
........................................... 4-33
4.2.7 The photosensitive drum fails to
rotate .................................. 4-34
4.2.8 The pre-exposure lamp fails to
go ON ................................ 4-34
4.3 Reader Unit .............................. 4-35
4.3.1 The No. 1 mirror base fails to
move .................................. 4-35
4.3.2 The scanning lamp fails to go
ON ..................................... 4-36
4.4 Message Indication .................. 4-37
4.4.1 The “Add Toner” message fails
to go OFF ........................... 4-37
4.4.2 The “Control Card Set” mes-
sage fails to go OFF (when no
card reader is installed) ...... 4-37
4.4.3 The “Add Paper” message fails
to go OFF ........................... 4-37
4.4.4 The “Close the Front Cover”
massage fails to go OFF ..... 4-38
4.5 Paper Deck ............................... 4-39
4.5.1 Pickup fails ........................ 4-39
4.5.2 The deck lifter fails to move up
........................................... 4-40
5 Troubleshooting Feeding Faults ...... 4-41
5.1 Paper Jams ............................... 4-41
5.1.1 Pickup Assembly ............... 4-42
5.1.2 Separation/Feeding Assembly
........................................... 4-43
5.1.3 Fixing/Delivery Assembly, Du-
plex Reversing Assembly
........................................... 4-43