Canon iR2200 Series, Руководство по обслуживанию

Страница: 197 / 352

CHAPTER 5 SERVICE MODE
5-69
<FIXING>
Use it to execute fixing assembly-related automatic adjustments.
NIP-CHK
Use it to obtain output for automatic measurement of the fixing nip width.
Using the Mode
1) Make a solid black print in A4/LTR.
2) Make about 20 A4/LTR prints of the Test Sheet.
3) Place the A4/LTR solid black output obtained in step 1. in the manual
feed tray with the printed side facing down.
4) Select <NIP-CHK>, and press the OK key.
•
After pickup, the paper will stop between the fixing rollers and then de-
livered in about 20 sec.
5) Measure the width indicated in the diagram.
F05-501-07
Caution a and b are points 10 mm from both ends of the paper.
Paper feed
direction
Standard
a - c = 0.5 mm or less
Standard:
5.5
±
0.3 mm
c
a
b
Middle
of paper
COPIER>FUNCTION>FIXING