manualshive.com logo in svg

Canon iPF720 - imagePROGRAF Color Inkjet Printer, Руководство по обслуживанию

Цветной струйный принтер Canon iPF720 - imagePROGRAF предлагает высокое качество печати. На нашем сайте вы можете скачать бесплатно брошюру и технические характеристики, а также руководство по эксплуатации. Загрузите его с manualshive.com уже сейчас!

Поделиться
Скачать
background image

Chapter 1  

1-6

1.3 Product Specifications

1.3.1 Product Specifications

0019-6542

Type

Bubble-jet printer (desktop type)

Feeding system

Roll media: Manual (Rear loading)
Cut media: Paper tray (Front loading)

Feeding capacity

Roll media: 1 roll (up to 150mm in outside diameter)/Inner diameter of
paper tube: 2 or 3 inches
Cut media: 1 sheet 

Delivery method

Delivers the media with its printed side up in the forward direction.

Sheet delivery capability

1 sheet (collected in a output stacker)

Cutter

[CT-05] Auto-cutter with replaceable cartridges

Type of media

Plain Paper, Plain Paper(High Quality), Plain Paper(High Grade), All
Plain Paper_Conserve MBK, Coated Paper, Heavyweight Coated Paper,
Premium Matte Paper, Glossy Photo Paper, Semi-Glossy Photo Paper,
Recycled Coated Paper, Extra Heavyweight Coated Paper, Heavyweight
Glossy Photo Paper 2, Heavywght SemiGlos Photo Paper 2, Satin
Photographic Paper 190gsm, Synthetic Paper, Adhesive Synthetic Paper,
Proofing Paper, Colored Coated Paper, CAD Tracing Paper, CAD
Translucent Matte Film, CAD Clear Film, Newsprint for Proofing1,
Newsprint for Proofing2, Economy Bond Paper, Universal Bond Paper,
Premium Coated Paper, Matte Coated Paper 90gsm, Glossy
Photographic Paper 190gsm, Glossy Photographic Paper 240gsm, Satin
Photographic Paper 240gsm, HW Glossy Photo Paper, HW Satin Photo
Paper, Premium RC Photo Luster, Commercial Proofing Paper,
Commercial RC Proofing 210gsm, Commercial RC Proofing 270gsm

Supported thickness

0.07mm to 0.8mm

Media size (Roll media)

Width: 254mm to 914.4mm
Length: 203.2mm to 18m (Roll media up to 150 mm in outside diameter)

Media size (Cut sheet)

Width: 203.2mm to 917mm
Length: 203.2mm to 1600mm

Printable area (Roll media)

Bordered printing: Internal area, excluding 3mm top, bottom, and left
and right margins.
Borderless printing: Internal area, excluding 0mm top, bottom, and left
and right margins.
* The printable area may vary with each type of paper media used.

Width of media allowing borderless printing:
36"(914mm), A0(841mm), B1(728mm), 24"(610mm), A1(594mm),
B2(515mm), 16"(407mm), 14"(356mm), 10"(524mm)

Media type allowing borderless printing:
Heavyweight Coated Paper, Premium Matte Paper, Glossy Photo Paper,
Semi-Glossy Photo Paper, Extra Heavyweight Coated Paper,
Heavyweight Glossy Photo Paper 2, Heavywght SemiGlos Photo Paper
2, Satin Photographic Paper 190gsm, Premium Coated Paper, Glossy
Photographic Paper 190gsm, Glossy Photographic Paper 240gsm, Satin
Photographic Paper 240gsm, HW Glossy Photo Paper, HW Satin Photo
Paper, Premium RC Photo Luster

Printable area (Cut sheet)

Internal area, excluding a 3mm top margin, 23mm bottom margin and
3mm left and right margins. 
*1 Borderless printing does not support cut media as yet.
*2 The printable area may vary with each type of paper media used.

Printing recommendation area 
(Roll media)

Internal area, excluding a 20mm top margin, 5mm bottom margin, and
5mm left and right margins. 

Printing recommendation area 
(Cut sheet)

Internal area, excluding a 20mm top margin, 23mm bottom margin, and
5mm left and right margins.

Margins (Roll media)

Roll media: 3mm for top, bottom and left and right margins
Borderless roll media: 0mm for top, bottom and left and right margins

Margins (Cut sheet)

3mm top margin, 23mm bottom margin and 3mm left and right margins
* Borderless printing does not support cut media as yet.

Memory

256MB
Increase of memory: none

Firmware

Flash ROM (update from USB or Ethernet, IEEE1394)
- Printer description language
GARO (Graphic Arts language with Raster Operation), HP-GL/2, HP
RTL

Emulation

Not available.

Interface

USB2.0, Ethernet, IEEE1394 (option)

Operation panel

LCD (160 X 128 dots), 12 keys, 5 LEDs
- Panel language
English
- Message language
English, German, French, Italian, Spanish, Chinese, Korean, Russianand
and Japanese

Printhead/Ink Tank type

Printhead and separate ink tanks

Printhead

[PF-03] Number nozzles: 2560 nozzles per color

Содержание iPF720 - imagePROGRAF Color Inkjet Printer













































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для iPF720 - imagePROGRAF Color Inkjet Printer

GCC Technologies EXPERT 24 LX User Manual preview
EXPERT 24 LX
Бренд: GCC Technologies Страницы: 140
MIMAKI DM3-1810S Operation Manual preview
DM3-1810S
Бренд: MIMAKI Страницы: 146
MIMAKI cg-100AP Instruction Manual preview
cg-100AP
Бренд: MIMAKI Страницы: 180

Бренды по названию

Популярные бренды

Загрузить еще бренды