Canon iPF720 - imagePROGRAF Color Inkjet Printer, Руководство по обслуживанию

Страница: 43 / 204

Chapter 1
1-29
[System Setup]
T-1-19
[Information]
T-1-20
Setting Item Description, Instructions
[Warning] [Buzzer] Set the buzzer. Choose On for the buzzer to sound in case of errors.
[Detect Mismatch] Choose Warning for notification (display of a warning message) during printing if
the paper type specified in the printer menu does not match the paper type in the
printer driver. Choose None to continue print without notification. Choose Pause to
have printing paused under these circumstances. In this case, you can continue
printing by pressing the Online button.
[Keep Media Size] Choose On to use the paper size setting as the basis for printing instead of other
settings. The margin setting of the printer menu will be used instead of the margin
setting of the printer driver if the latter is smaller, which may prevent text or images
in the margin from being printed. Choose Off to use the printer driver settings
instead. Even if the margin setting of the printer driver is smaller than that of the
printer driver, text or images will not be cut off. However, this requires longer paper
because the actual margin will be equal to the margin setting of the printer driver
plus the margin setting of the printer menu.
[Paper Size Basis] [Sht Selection 1] Select which size is to be recognized, [ISO A3+] or [13"x19"(Super B)], when the
detected size of the cut sheet is between these sizes.
[Roll Selection 1] If roll size detection is activated, choose whether ISO A3 (297 mm) and 300 mm
Roll is applied when an inbetween size is detected.
[Roll Selection 2] If roll size detection is activated, choose whether 10in. (254 mm) or JIS B4 (257
mm) is applied when an inbetween size is detected.
[Sht Selection 2] Select which size is to be recognized, [ISO B1] or [28"x40"(ANSI F)], when the
detected size of the cut sheet is between these sizes.
[Noz. Check Freq.] Specify the timing for automatic checks of nozzle clogging. Choose Off to disable
checking. Choose 1 page to check after each page is printed. Choose 10 pages to
check once after every ten pages are printed.
[Sleep Timer] Specify the period before the printer enters sleep mode.
[Length Unit] Choose the unit of measurement when roll length is displayed. You can switch the
unit displayed for Roll Length Set and the remaining paper amount displayed in the
submenu.
[Time Zone] Specify the time zone. Time zone options indicate a main city in this time zone and
the difference from Greenwich Mean Time.
[Date Format] Specify the date format.
[Date & Time] [Date] Set the current date.
[Time] Set the current time.
[Language] Specify the language used on the Display Screen.
[Contrast Adj.] Adjust the contrast of the Display Screen.
[Erase HDD Data] Erase all data on the hard disk.
[Reset PaprSetngs] Restores settings that you have changed with Media Configuration Tool to the
factory default values.
Setting Item Description, Instructions
[System Info] [Version] [Firmware] Displays the version of the printer and firmware.
[Boot] Displays the Boot ROM version of the printer.
[MIT] Displays the DB format version of the MIT.
[s/n] Displays the printer serial number.
[MAC] Displays the MAC address of the printer.
[IP] Displays the printer IP address.
[Error Log] [########-####] Displays the most recent error messages (up to two).
[Job Log] (Choose from information
about the latest three print
jobs. [Document Name] Displays the document name in the last print job.
[User Name] Displays the name of the user who sent the print job.
[Page Count] Displays the number of pages in the print job.
[Job Status] Displays the results of the print job processed.
[Print Start Time] Displays the time when the print job was started.
[Print End Time] Displays the time when the print job was finished.
[Print Time] Displays the time required to print the job.
[Print Size] Displays the paper size in the print job.
[Media Type] Displays the paper type in the print job.
[Interface] Displays the interface used for the print job.
[Ink Consumed] Displays the ink density of each color in the print job.