Canon imageRUNNER ADVANCE-series, Руководство по обслуживанию

Страница: 35 / 64

3
3
3-15
3-15
Operations > System Management Operations > Various Setting > Setting Log Level
Operations > System Management Operations > Various Setting > Setting Log Level
Setting Log Level
This section describes how to set system log levels.
1. Start [Service Mode] at Level 1.
1). Press [Setting/Registration (User Mode)] button on the control panel.
2). Press [2] and [8] buttons at a time on the control panel.
3). Press [Setting/Registration (User Mode)] button on the control panel.
4). [Service Mode] screen is shown.
2. Press [Updater] button.
3. Press [Software Management Settings] button.
■
F-3-35 F-3-35
4. Press [Settings] button.
5. Select a log level from [Log Level] dropdown list.
[Log Level]:
Select one of 5 levels ranging from [0] to [4].
See the table below for logs output in each level.
Log Level
Log Output
Trace Information Important Message Ordinary Error System Error
0 - - - - Yes
1 - - - Yes Yes
2 - - Yes Yes Yes
3 - Yes Yes Yes Yes
4 Yes Yes Yes Yes Yes
•
F-3-36 F-3-36
F-3-37 F-3-37
T-3-1 T-3-1