Canon imageRUNNER ADVANCE-series, Руководство по обслуживанию, Страница: 15 / 64

2
2
2-3
2-3
Preparation > Network Settings > Confirming URL Setting of Distribution Server
Preparation > Network Settings > Confirming URL Setting of Distribution Server
Network Settings
Connecting to External Network
The method of connecting to external network is similar to a normal network connection
method. Refer to user manual of the device for details.
NOTE:
See User Manual for how to connect the device to the external network.
Before using UGW link or User mode, see the sections below to prepare as required.
“Enabling UGW Link”
“Enabling [Update Firmware] Button of User Mode”
“Enabling [Install Application/Options] Button of User Mode”
•
•
NOTE:
“External Network” here means the network connecting the device to CDS via Internet.
Confirming URL Setting of Distribution Server
This section describes how to confirm the URL setting of the distribution server.
1. Start [Service Mode] at Level 1.
1). Press [Setting/Registration (User Mode)] button on the control panel.
2). Press [2] and [8] buttons at a time on the control panel.
3). Press [Setting/Registration (User Mode)] button on the control panel.
4). [Service Mode] screen is shown.
2. Press [Updater] button.
F-2-1 F-2-1