Canon imageRUNNER ADVANCE C5000 Series, Техническое пособие

Страница: 81 / 239

79
Next perform continuous feeding from the right (left) deck, and the pickup surface level on top of the stack of
paper would gradually lower. This would drive the lifter motor and let the lifter plate ascend.
However, if the lifter wire is slack, the lifter plate will not ascend properly and this would lead to a pickup
failure which results in the forementioned symptom.
Service work
Prepare the countermeasure part below that prevents the slack of the lifter wire to attach to the deck have
had the symptom above.
The following is the number of the parts required per one deck.
- FC6-3764-000 the damper holder (1 pcs)
- FC1-3975-020 the leaf spring (1 pcs)
- FC1-3976-000 the brake pad (2 pcs)
- XD1-1105-239 the washer (1 pcs)
- XA9-0732-010 RS screw (1 pcs)
1) Pull out the right or left deck, remove the 4 screws[1] and the deck front cover[2].
2) Attach the 2 brake pads (FC1-3976-000)[1] and the 1 leaf spring (FC1-3975-000)[2] as shown in the
photo.