Canon imageRUNNER ADVANCE C5000 Series, Техническое пособие

Страница: 227 / 239

9
23) Remove the 2 screws [1], 1 stepped screw [2], and 1 hook [3] to detach the hopper unit
(Bk) [4].
[Caution] When installing the hopper unit (Bk), perform the following procedure to
install the hopper unit (Bk) with the toner supply mouth pointing upward.
1) Check that the black developing assembly pressure lever is pulled. Fit teeth [A] of
the rail cover (rear) [1] and teeth [B] of the gear [2] together and then push in the
rail cover (rear) until it stops.
2) With the toner mouth [a] rotated until it pushes against the stop, be sure that the 3
bosses [2] and 1 hook [3] of the hopper unit (Bk) [1] are fully inserted before
tightening the screws in the order of [4], [5] and [6].
BK