Canon imageRUNNER ADVANCE C5000 Series, Техническое пособие

Страница: 76 / 239

74
[Caution] Before installing the toner container replacement unit inner cover, make sure that each parallel pin
of the link shafts of all the stations are tilted at an angle [d] of about 45 degrees. Even in a station where the
link shaft sheet is not attached, the angle of the parallel pin may be shifted when the toner container
replacement unit inner cover is removed. Thus, be sure to check all of the stations.
b-7) Install the parts by reversing the procedure from step b-3), and turn on the main power switch. If the
symptom is not reproduced, the work is completed.
c) Damage on the toner insertion inlet cover sensor
c-1) Clear the error via Service mode, and turn off the main power switch.
c-2) Remove 2 hinge pins [1] and remove the front upper cover [2].
c-3) Remove 4 screws [1], 2 claws [2], and 3 protrusions [3]. Then remove the toner container replacement
unit inner cover [4].