Routine M
ain
tenanc
e
Envelope Feeder Attachment-D1
(Optional)
This section explains how to use the Envelope Feeder Attachment-D1.
The Envelope Feeder Attachment-D1 can only be attached to Paper Drawer 2.
How to Use the Envelope Feeder Attachment
The following types of envelopes can be loaded into the envelope feeder attachment: COM10 No.10, Monarch, DL, and
ISO-C5.
The setting of the machine and guide size is set to COM10 No. 10 as the default setting.
When you attach the envelope feeder attachment to the paper drawer, do not forcefully move the front guide of the
paper drawer in the wrong direction. Doing so may detach the envelope feeder attachment from the paper drawer.
Do not print on both sides of an envelope. Doing so may cause paper jams, dirty prints, or make the inside of the
machine dirty.
Do not load the following types of envelopes inside the envelope cassette. Doing so may cause paper jams, dirty prints,
or make the inside of the machine dirty.
Curled, creased, or folded envelopes
Very thick or thin envelopes
Damp or wet envelopes
Torn envelopes
Irregularly shaped envelopes
Envelopes with clasps or windows
Envelopes that have already been sealed
Envelopes with holes or perforations
Envelopes with specially coated surfaces
Envelopes made of surface treated colored paper
Envelopes that are self-sticking, which use ink, glue, or other substances that can melt, burn, vaporize, or emit smells under the heat of a fixing unit
(approximately 200 °C). Depending on the materials used for the seal, the glue may melt under the fixing unit’s heat, sealing the envelopes.
When the envelope cassette is attached and envelope is selected for the paper type, the envelope is ejected to the tray
under the scanner unit.
If you are printing on envelopes, empty the output tray when up to 10 printed envelopes accumulate in the tray.
Envelopes should be stored in a place away from high-temperatures and humidity.
If there is a temperature difference between the location where the envelopes are stored and the location where the
envelopes are being printed, leave the envelopes in the printing location at room temperature before you use them.
Correctly match the paper size dial, size switch, and Register Envelope Drawer in Preferences (Settings/Registration) with
the size of the envelopes being loaded. Failure to do so may cause paper jams, dirty prints, or make the inside of the
machine dirty.
If you want to adjust the width guides to load ISO-C5 envelopes, contact your local authorized Canon dealer.
For more information on envelope types that can be loaded in the envelope feeder attachment, see e-Manual > Basic
Operations.
Sizes of the envelopes are as follows:
COM10 No.10: 104.7 mm x 241.3 mm
Monarch: 98.4 mm x 190.5 mm
DL: 110 mm x 220 mm
ISO-C5: 162 mm x 229 mm
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Содержание imageRUNNER Advance C2020i
Страница 149: ...148 Frequently Asked Questions MEMO ...
Страница 158: ...157 MEMO ...
Страница 159: ......