Paper which has been rolled or curled must be straightened out before loading it into the paper drawer.
You will not be able to make copies or print if you load paper that exceeds the loading limit (
), or if the paper drawer is
not completely pushed into the machine.
Always check that the paper drawers are in place, and that the paper does not exceed the loading limit (
).
When loading paper into the paper drawer for the first time, set the paper size dial to match the paper size being loaded.
(See “Adjusting a Paper Drawer to Hold a Different Paper Size” on p. 56.)
The following paper sizes and number of sheets can be loaded in Paper Drawers 1 and 2:
Paper Drawer 1: 250 sheets (80 g/m
2
) or 270 sheets (64 g/m
2
)
Paper Drawer 2: 550 sheets (80 g/m
2
) or 680 sheets (64 g/m
2
)
If there are instructions on the package of paper about which side of the paper to load, follow those instructions.
When the paper is loaded into the paper drawer, the side facing up is the one printed on.
If problems occur, such as poor print quality or paper jams, try turning the paper stack over, and reload it.
For more information on the print direction of preprinted paper (paper which has logos or patterns already printed on it),
see e-Manual > Copy.
Rewrap any remaining paper in its original package, and store it in a dry place, away from direct sunlight.
If paper runs out and printing is stopped, load a new paper stack. Printing restarts after the new paper stack is loaded.
•
•
•
•
•
•
•
•
•
•
•
•
•
Содержание imageRUNNER Advance C2020i
Страница 149: ...148 Frequently Asked Questions MEMO ...
Страница 158: ...157 MEMO ...
Страница 159: ......