Canon imagePROGRAF iPF8300S, Основное руководство

Страница: 44 / 52

44
Error Messages
The paper is too small.
Error Message Cause Corrective Action
The paper is too small. The loaded paper is too small. Replace the paper with paper of A4/Letter (vertical)
size or larger as follows.
Press ▲ or ▼ to select Change Paper , press the
OK button, and remove the paper.
( → , Removing Sheets)
( → "Loading and Printing on Sheets," User's Guide)
2.
1.
Switch to paper A4/Letter (vertical) or larger.
The printer will resume printing.
Press ▲ or ▼ to select Stop Printing , and then press
the OK button to stop printing.
Replace roll with 10 in. wide or
larger roll.
The loaded paper is too small. Replace the roll with a roll 10 inches in width or larger
as follows.
Press ▲ or ▼ to select Change Paper , and then
press the OK button to remove the roll.
( → , Removing the Roll from the Printer)
( → , Attaching the Roll Holder to Rolls)
2.
1.
Replace the roll with a roll 10 inches wide or larger.
The printer will resume printing.
Press ▲ or ▼ to select Stop Printing , and then press
the OK button to stop printing.
Replace paper with A4/LTR
(vertical) or larger
( → "Removing the Roll Holder from Rolls," User's
Guide)
( → , Loading Rolls in the Printer)
(When you are attempting to print
a test print sheet or other printer
status information.)
(When you are attempting to print
a test print sheet or other printer
status information.)
The paper is too small. When Detect Mismatch in the
Control Panel menu is set to
Pause or Hold Job , paper smaller
than the size specified in the
printer driver is loaded.
Press ▲ or ▼ to select Print , and then press the OK
button to resume printing.
However, note that this error may cause paper jams
and affect the printing quality.
Adjust the paper size setting in the printer driver to
match the size loaded in the printer as follows.
Press ▲ or ▼ to select Stop Printing , and then
press the OK button to stop printing.
1.
Change the paper size setting in the printer driver to
the size loaded in the printer and try printing again. 2.
Replace the loaded paper with paper of a size that
matches the size setting in the printer driver as
follows.
Press ▲ or ▼ to select Change Paper , and then
press the OK button to stop printing.
1.
Replace the loaded paper to match the paper width
setting in the printer driver and try printing again. 2.
When Detect Mismatch in the
Control Panel menu is set to
Warning , paper smaller than the
size specified in the printer driver
is loaded.
You can continue to print, but note that this error may
cause problems in the printing results.