Canon imagePRESS C800 Series Скачать руководство пользователя страница 85 | Manualshive

Страница: 85 / 168

Canon imagePRESS C800 Series Скачать руководство пользователя страница 85

Firmware upgrade policy

The firmware upgrade policy is controlled by the [Upgrade Policy] setting available in Service
mode.
•

Manual upgrade disabled (default)

By default "Manual upgrade" is disabled. At startup the PRISMAsync controller verifies the
installed firmware on engine and accessories. If the installed firmware differs from the
firmware stored on the PRISMAsync, the firmware of the engine and accessories will either be
upgraded or downgraded with the version on the PRISMAsync. This setting ensures the
compatibility between engine firmware, accessories firmware and PRISMAsync software.

•

Manual upgrade enabled

After "Manual upgrade" is enabled, the PRISMAsync will no longer check the firmware versions
on engine and accessories at startup. A firmware update of the engine and accessories can be
done by using a USB stick (created with SST tool) which contains the firmware files.

NOTE

Enabling "Manual upgrade" could lead to incompatibilities between engine, accessories and

PRISMAsync.

Manual firmware update by Field Service Technician (FST)

Besides the automatic firmware upgrade done by the PRISMAsync controller, it is also possible
for a FST to update the firmware of the host machine and accessories. This update can be done

Firmware upgrade settings

Chapter 8 - Firmware upgrades via PRISMAsync

85

«
...
83
84
85
86
87
...
»

Содержание imagePRESS C800 Series









































































































































































Отзывы:

Нет отзывов