manualshive.com logo in svg

Canon imagePRESS C800 Series, Техническое и сервисное руководство

Поделиться
Скачать
Canon imagePRESS C800 Series Скачать руководство пользователя страница 100

Firmware upgrade additional information

Additional information related to a firmware upgrade

Feedback:

The feedback shown combines the feedback of both the engine and PRISMAsync during the
firmware upgrade. The PRISMAsync (lines starting with PRISMAsync) will include information on
which files actually transferred to the engine and which files are skipped because of version is
present already or a module being non-present.

Version checking.

In order the system to operate correctly the engine and accessories and PRISMAsync must have
compatible firmware installed. Therefore version checking is executed by PRISMAsync controller.
• Each PRISMAsync version will contain a list with compatible engine and accessories firmware.
• PRISMAsync will check if the installed engine and accessories firmware level matches with the

actual installed PRISMAsync version.

• Version checking is executed when starting a connection with the engine in normal user mode.

In (safe) download mode version checking is not executed.

• If non matching firmware is found PRISMAsync will report this in the data-log. The data log

information can be viewed in service mode -> error analysis.

Information on screen

Information on screen

Explanation

1. Button to select

a. Auto upgrade
b. Non auto upgrade

2. Button to start upgrade process.
3. Running process step
4. Detailed information by engine and or

PRISMAsync.

5. Via scroll bar text can be scrolled back.

PRISMAsync…….

PRISMAsync at beginning of a row:
Message generated by PRISMAsync.
Messages with e.g. DLM, EXT ….in front are
messages generated by engine.

4

Firmware upgrade additional information

100

Chapter 8 - Firmware upgrades via PRISMAsync

Содержание imagePRESS C800 Series









































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды