manualshive.com logo in svg

Canon ImageCLASS MF4690, Руководство по обслуживанию

Принтер Canon ImageCLASS MF4690 поставляется с руководством пользователя Starter Manual, которое можно загрузить бесплатно с {веб-сайта}. Этот многофункциональный устройство обеспечивает высокое качество печати, сканирования, копирования и факса, делая его незаменимым инструментом в офисе или дома.

Поделиться
Скачать
background image

Chapter 13  

13-4

##0288

[Tx] 

after transmission of EOP, a signal other than PIN, PIP, MCF, RTP, or RTN has been received.

##0289 

[Tx]

after transmission of EOM, a signal other than PIN, PIP, MCF, RTP, or RTN has been received.

##0290

[Tx]

after transmission of MPS, a signal other than PIN, PIP, MCF, RTP, or RTN has been received.

##0670 

[Tx] 

at time of V.8 late start, the V.8 ability of DIS front the receiving party is expected to be detected, and the CI signal is 
expected to be transmitted in response; however, the procedure fails to advance, and the line is released because of T1 time-
out.

##0671

[Rx]

at time of V.8 arrival, procedure fails to move to phase 2 after detection     of CM signal from caller, causing T1 time-out 
and releasing line

##0672 

[Tx]

at time of V.34 transmission, a shift in procedure from phase 2 to phase 3 and thereafter stops, causing the machine to release 
the line and suffer T1 timeout.

##0673 

[Rx]

at time of V.34 reception, a shift in procedure from phase 2 to phase 3 and thereafter stops, causing the machine to release 
the line and suffer T1 timeout.

##0674

[Tx]

at time of V.34 transmission, a shift in procedure from phase 3 and phase 4 to the control channel and thereafter stops, 
causing the machine to release the line and suffer T1 timeout.

##0675 

[Rx]

at time of V.34 reception, a shift in procedure from phase 3 and phase 4 to the control channel and thereafter stops, causing 
the machine to release the line and suffer T1 timeout.

##0750 

[Tx] 

at time of ECM transmission, no meaningful signal is received after transmission of PPS-NULL, causing the procedural 
signal to be transmitted more than specified.

##0752 

[Tx]

at time of ECM transmission, DCN is received after transmission of PPS-NULL.

##0753 

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-
NULL, or T5 time-out (60 sec) has occurred.

##0754 

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-
NULL.

##0755 

[Tx]

at time of ECM transmission, no meaningful signal is received after transmission of PPS-MPS, causing the procedural signal 
to be transmitted more than specified.

##0757 

[Tx]

at time of ECM transmission, DCN is received after retransmission of PPS-MPS.

##0758 

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-MPS, 
or T5 time-out (60 sec) has occurred.

##0759 

[Tx] 

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-MPS.

##0760 

[Tx]

at time of ECM transmission, no meaningful signal is received after transmission of PPS-EOM, causing the procedural 
signal to be transmitted more than specified.

##0762 

[Tx]

at time of ECM transmission, DCN is received after transmission of PPS-EOM.

##0763 

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-MPS, 
or T5 time-out (60 sec) has occurred.

##0764 

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-
EOM.

##0765

[Tx]

at time of ECM transmission, no meaningful signal is received after transmission of PPS-EOP, causing the procedural signal 
to be transmitted more than specified.

##0767 

[Tx]

at time of ECM transmission, DCN is received after transmission of PPS-EOP.

##0768 

[Tx] 

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-EOP, 
or T5 time-out (60 sec) has occurred.

##0769 

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-EOP.

##0770 

[Tx] 

at time of ECM transmission, no meaningful signal is received after transmission of EOR-NULL, causing the procedural 
signal to be transmitted more than specified.

##0772 

[Tx]

at time of ECM transmission, DCN is received after transmission of EOR-NULL.

##0773 

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of EOR-
NULL, or T5 time-out (60 sec) has occurred.

##0774

[Tx]

at time of ECM transmission, ERR is received after transmission of EOR-NULL.

##0775 

[Tx]

at time of ECM transmission, no meaningful signal is received after transmission of EOR-MPS, causing the procedural 
signal to be transmitted more than specified.

##0777 

[Tx]

at time of ECM transmission, DCN is received after transmission of EOR-MPS.

##0778 

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission EOR-MPS, 
or T5 time-out (60 sec) has occurred.

##0779 

[Tx]

at time of ECM transmission, ERR is received after transmission of EOR-MPS.

##0780 

[Tx] 

at time of ECM transmission, no meaningful signal is received after transmission of EOR-EOM, causing the procedural 
signal to be transmitted more than specified.

##0782 

[Tx] 

at time of ECM transmission, DCN is received after transmission of EOR-EOM.

##0783 

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of EOR-
EOM, or T5 time-out (60 sec) has occurred.

##0784 

[Tx]

at time of ECM transmission, ERR is received after transmission of EOR-EOM.

##0785 

[Tx]

at time of ECM transmission, no meaningful signal is received after transmission of EOR-EOP, causing the procedural 
signal to be transmitted more than specified.

##0787 

[Tx]

at time of ECM transmission, DCN is received after transmission of EOR-EOP.

##0788 

[Tx] 

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of EOR-
EOP, or T5 time-out (60 sec) has occurred.

##0789 

[Tx]

at time of ECM transmission, ERR is received after transmission of EOR-EOP.

##0790

[Rx]

at time of ECM reception, ERR is transmitted after transmission of EOR-Q.

##0791 [Tx/Rx]

while 

ECM 

mode procedure is under way, a signal other than a meaningful signal is received.

##0792 

[Rx]

at time of ECM reception, PPS-NULL cannot be detected over partial page processing.

##0793 

[Rx]

at time of ECM reception, no effective frame is received while high-speed signal reception is under way, thus causing time-
out.

##0794 

[Tx]

at time of ECM reception, PPR with all 0s is received.

##0795 

[Tx/Rx]

a fault has occurred in code processing for communication.

No. Tx/Rx

Description

Содержание ImageCLASS MF4690























































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ImageCLASS MF4690

ABLE AP1200 Programmer'S Manual preview
AP1200
Бренд: ABLE Страницы: 26
ABLE Systems Ap890 User Manual preview
Ap890
Бренд: ABLE Systems Страницы: 12
Konica Minolta bizhub c3110 Manual preview
bizhub c3110
Бренд: Konica Minolta Страницы: 7
Ice PegasusHS Service Manual preview
PegasusHS
Бренд: Ice Страницы: 133
Canon imageCLASS LBP325dn Getting Started preview
imageCLASS LBP325dn
Бренд: Canon Страницы: 36
Canon imageCLASS LBP161dn+ Getting Started preview
imageCLASS LBP161dn+
Бренд: Canon Страницы: 24
Canon ImageCLASS LBP720 Series Important Safety Instructions Manual preview
ImageCLASS LBP720 Series
Бренд: Canon Страницы: 20
Canon imageCLASS LBP6300dn Quick Setup Manual preview
imageCLASS LBP6300dn
Бренд: Canon Страницы: 2
Canon imageCLASS LBP6780dn Quick Setup Manual preview
imageCLASS LBP6780dn
Бренд: Canon Страницы: 2
Canon imageCLASS X MF1643i II Setup Manual preview
imageCLASS X MF1643i II
Бренд: Canon Страницы: 16
Canon imageCLASS LBP701BC Quick Setup Manual preview
imageCLASS LBP701BC
Бренд: Canon Страницы: 2
Canon imageCLASS MF543dw Getting Started preview
imageCLASS MF543dw
Бренд: Canon Страницы: 52
Canon imageCLASS MF445dw Getting Started preview
imageCLASS MF445dw
Бренд: Canon Страницы: 72
Canon imageCLASS MF515x Getting Started preview
imageCLASS MF515x
Бренд: Canon Страницы: 32
Canon imageCLASS LBP621Cdw Getting Started preview
imageCLASS LBP621Cdw
Бренд: Canon Страницы: 68
Canon imageClass LBP6230dw Manual preview
imageClass LBP6230dw
Бренд: Canon Страницы: 296
Canon imageCLASS MF232dw Getting Started preview
imageCLASS MF232dw
Бренд: Canon Страницы: 64
Canon imageCLASS LBP161dn Getting Started preview
imageCLASS LBP161dn
Бренд: Canon Страницы: 68

Бренды по названию

Популярные бренды

Загрузить еще бренды