Canon FAX-JX500, Руководство по обслуживанию

Страница: 74 / 154

5-12-3 #3 FAX TYPE
Each model equips different specifications and functions from one another. Such differences are
by not only the MFP service function region setting ( Part1: 5-8-6 region setting ) but also FAX
type settings. Adjusting the FAX type with SSSW changes each parameter according to the
default. MFP service function region setting does not change when adjusting the FAX type.
5-12-4 #4 NCU
Do not use this switch.
5-12-5 #5 TAM
Adjust the TAM setting with the Bit switch and the numeric parameter.
1) Bit SW
z
SW01
[Bit 0] to [Bit2] and [Bit 6]: Do not use the bits.
z
SW02
[Bit 0], [Bit 1], [Bit 3] and [Bit 5]: Do not use the bits.
BIT FUNCTION 1 0
*0 Not used.
*1 Not used.
*2 Not used.
3 DT Detection during TAM Available Not available
4 ROT detection while playing ICM Available
Not available
5 No sound detection Available Not available
*6 Not used.
7 No sound time recording Available
Not available
BIT FUNCTION 1 0
*0 Not used.
*1 Not used.
2 Signal frequency change Available Not available
*3 Not used.
4 Intermittent signal detection From ON From both ON/OFF
*5 Not used.
6 Signal type Continuous tone
Intermittent tone
7 Signal detection Available Not available
Part 1 - 66