Canon FAX-JX500, Руководство по обслуживанию

Страница: 73 / 154

*: Do not use these parameters.
z
No.01 Line Monitor Selection
{
0: DIAL
{
1: SERVICE
{
2: OFF
z
No.02 Modem Transmission Level Range Setting (#1 BIT SWITHC SW09/bit0
of SSSW)
{
0: 8-15
{
1: 0-15
z
No.30 V.34 Primal Channel Symbol Maximum Speed Setting
{
The value on “ 4 ” is not available.
39 Maximum ringing time during manual/automatic switching 1 to 60
40 Maximum number of ring counting during the automatic ringing 1 to 99
*41 Not used. 10 to 1000
42 Pre-posing during DT not-detected 100 to 500
43 Pulse dial setup time (pulse dialing) 0 to 9999
44 Pulse dial clear time (pulse dialing) 0 to 9999
*45 Not used. 0 to 4
*46 Not used. 1 to 2400
*47 Not used. 0 to 10
*48 Not used. 0 to 10
49 TEL DTMF transmission level (High) 0 to 9999
50 TEL DTMF transmission level (Low) 0 to 9999
Part 1 - 65