Maintaining the
machine
Do not attempt to disassemble or modify the machine. There are no user
serviceable parts inside the machine.
The machine contains high-voltage components. Never attempt any maintenance
procedure not described in this guide.
Working around
the machine
Do not use highly flammable sprays near the machine.
This could cause a fire or electric shock if the spray comes into contact with
electrical components inside the machine.
You may cause injury or damage the machine if you ignore any of these safety
precautions.
Choosing a
location
Do not install the machine in a location that is unstable or subject to excessive vibration.
Do not install the machine in locations that are very humid or dusty, in direct sunlight,
outdoors, or close to a heating source.
To avoid the risk of fire or electric shocks, install the machine in a location with an
ambient temperature range of 15
°
C to 27.5
°
C (59
°
F to 81.5
°
F) and humidity of 20%
to 80% (condensation free).
Do not place the machine on a thick rug or carpet.
Do not place the machine with its back attached to the wall.
Power supply Ensure that the area around the power outlet is kept clear at all times so you can easily
unplug the power cord if necessary.
Never remove the plug by pulling on the cord.
Do not use an extension lead/cord.
Working
around the
machine
Never put your hands or fingers in the machine while it is printing.
Do not place any object on the machine.
Do not place metal objects (paper clips, staples, etc.) or containers of flammable solvents
(alcohol, thinners, etc.) on top of the machine.
If any foreign object (metal or liquid) fall into the machine, unplug the power cord and call
for service.
Do not transport or store the machine on a slant, vertically or upside-down, as the ink may
leak and damage the machine.
FINE
Cartridge
For safety reasons, store FINE Cartridge out of the reach of small children.
If a child ingests any ink, consult a doctor immediately.
Do not shake FINE Cartridge.
Ink may leak out and stain clothing or the surrounding area.
Never touch the electrical contacts on a FINE Cartridge after printing. The metal parts
may be very hot and couldcause burns.
Do not throw FINE Cartridge into fire.
Содержание FAX-JX500
