Canon EOS C300, Инструкция по эксплуатации

Страница: 79 / 202

79
Adjusting the Focus
Magnification
1 Press the MAGN. button.
•
^
appears at the lower center of the screen and the center of the screen is magnified approximately
2 times*.
• A white frame representing the whole screen area is displayed on the top left of the screen. The orange
frame within it represents the approximate part of the image shown magnified.
2 If necessary, use the joystick (
ÝÞ
) or SELECT dial to move the orange frame around and check other
parts of the image.
•
#
Set the focus mode switch on an EF lens to MF in advance.
• You can move the orange frame 5 steps vertically or horizontally. Press the CANCEL button to return the
magnification frame to the center position.
3 Press the MAGN. button again to cancel the magnification.
* The magnification that appears on the LCD screen and on the viewfinder screen is different. The magnification also differs based
on the video configuration.
NOTES
• Peaking/Magnification appears only on the camcorder screen. It will not appear on an external monitor
connected to the camcorder and will not affect your recordings.
• You can use the [
£
LCD/VF Setup]
>
[Peaking 1] and [Peaking 2] settings to set the color, gain and
frequency of the two peaking levels independently of each other.
• When using the camcorder’s screen to focus:
- The camcorder features professional video scopes (
A
99). You can display the edge monitor to help you
focus even more accurately.
- You can use peaking together with the edge monitor. In such case, the gain and frequency of the peaking
effect will be adjusted automatically according to the gain settings of the edge monitor.
#
One-Shot AF
During manual focus, you can use the one-shot AF function to have the camcorder focus automatically only
once on the subject at the center of the screen.
Using an Assignable Button
To use the one-shot AF function, you must first set an assignable button to [ONE-SHOT AF] in advance.
1 Open the [AF Mode] submenu.
[
~
Camera Setup]
>
[AF Mode]
• This submenu is available only with lenses compatible with automatic
aperture. Otherwise, start from step 3.
2 Select [One Shot] and then press SET.
3 Set the focus mode switch on the EF lens to AF (autofocus) in
advance.
• [AF] will appear on the left of the screen.
4 Set an assignable button to [ONE-SHOT AF] (
A
111).
5 Press and hold the assignable button.
• The AF frame will appear at the center of the screen and the camcorder will focus automatically. When
correct focus has been achieved, the AF frame turns green.
• If the camcorder cannot focus automatically, the AF frame will turn red.
• The AF frame will disappear when you release the assignable button.
[
~
Camera Setup]
[AF Mode]
[One Shot]
COP
Y