Canon EOS C300, Инструкция по эксплуатации

Страница: 103 / 202

103
Recording GPS Information (Geotagging)
Recording GPS Information (Geotagging)
When the optional GP-E1 GPS Receiver is attached to the camcorder’s WFT terminal, the camcorder will
automatically record the GPS information (latitude, longitude and altitude) in the metadata of each clip recorded
(
A
96). For details about attaching and configuring the receiver, refer to the GP-E1’s instruction manual.
Attaching the GPS Receiver
Turn off the camcorder and attach the optional GP-E1 GPS Receiver to the camcorder’s WFT terminal.
Activating the GPS Receiver
1 Open the GPS [Setting] submenu.
[
w
Other Functions]
>
[GPS]
>
[Setting]
2 Select [On] and then press SET.
• The icon appears on the right of the screen and will blink as the
receiver tries to acquire satellite signals.
• When satellite signals are correctly acquired, the icon will stay
continuously on. GPS functions will be activated and clips recorded
thereafter will be geotagged.
IMPORTANT
• In certain countries/regions, the use of GPS may be restricted. Be sure to use the GPS receiver in accordance
with local laws and regulations of the country/region where the receiver is used. Be particularly careful when
traveling outside of your home country.
• Be careful about using the GPS receiver in places where the use of electronic devices is restricted.
Operating modes:
햲
햳
햷
햴
햵
햶
[
w
Other Functions]
[GPS]
[Setting]
[Off]
Adjusting the Date/Time Automatically According to GPS Position
Setting the [
w
Other Functions]
>
[GPS]
>
[Auto Time Setting] to [On], you can have the camcorder
automatically adjust its date and time settings according to the information received from the GPS signal while
an optional GP-E1 GPS Receiver is attached to the camcorder.
COP
Y