![background image](http://html.mh-extra.com/html/canon/dp-v2411/dp-v2411_instruction-manual_61494107.webp)
107
Troubleshooting
Symptom
Cause and Action
Power does not turn on.
(Power indicator does not turn on.)
•
Press the button.
•
Check that the AC power supply or DC power cord is connected
correctly.
•
Brightness of the power indicator may be turned off. Turn it on and
check once more.
The screen is dark.
When the power indicator does not turn on:
•
Press the button.
•
Check that the AC power supply or DC power cord is connected
correctly.
When the power indicator is lit orange:
•
Press the button.
When the power indicator is flashing orange:
•
Flashing once every 3 seconds : Contact Canon Customer Center.
•
Flashing twice every 3 seconds :
- Turn on the power with the button.
- The temperature of the display rises (or falls) depend on operation
environment. Check the environmental conditions and do not use in
direct sunlight.
- If the power still does not turn on, contact Canon Customer Center.
The power suddenly goes off when a DC
power supply is used.
•
Depending on the model of DC power supply used, the output voltage
may decrease suddenly and even turn off (0 V output) when a threshold
value is reached. Before that, a warning message about low input
voltage may be displayed only briefly or not at all. Connect a charged
DC power supply or AC power supply.
—
The image does not display.
•
Set each item in [Channel Settings] according to input signal.
The 3G-SDI RAW signal image does not
display.
•
At times the 3G-SDI RAW signal image may not display, depending
on the type of the CINEMA EOS SYSTEM camera. Refer to the Canon
website for a list of supported products.
—
There is a blank area when set to Quad
Input/Dual Input.
•
There may be no input signal. Check the signal.
•
Signals with different resolution or frequency may be input from each
terminal. Check the signal.
The image appears to be delayed.
•
When [Reduce Backlight Flash] is set to [On], the displayed image may
be delayed depending on the scene. In such case, change the setting to
[Off].
Screen is too bright/dark.
•
Adjust the [Contrast] on the OSD menu.
•
Adjust the settings for [Boost Contrast] on the OSD menu.
•
There is a limit on the service life of LCD backlight. If the screen
becomes dark or starts flickering, contact Canon Customer Center.