OSD Menu
62
Sub Menu
Setting Options (Bold: factory default)
Line Color
White
, Red, Green,
Blue, Yellow, Cyan,
Magenta
Sets the color of the aspect marker line.
Line Brightness
High
Low
Sets the brightness of the aspect marker line.
H Position
-65 to 65 (
0
)
Changes horizontal position without changing the aspect.
V Position
-35 to 35 (
0
)
Changes vertical position without changing the aspect.
Safety Zone Marker 1, 2
1
There are two types of [Safety Zone Marker]: 1 and 2, which share the same settings. A safety zone
marker is used to set the safe zone of the image (actual displayed area) to check the image.
Enable
On,
Off
Switches the safety zone marker On, Off.
Aspect Ratio
2
16:9
, 15:9, 14:9, 13:9,
4:3, 2.39:1, 2.35:1,
1.896:1, 1.85:1, 1.66:1,
Variable
•
When Variable is
selected
1.00:1 to 3.00:1
(
1.78:1
)
Sets the aspect ratio of the safety zone marker.
[Variable]: The aspect ratio can be entered as a numeric value (0.01:1
increments). The grayed out slider becomes active and can be used
to set the aspect ratio.
Area Size
80%
, 88%, 90%, 93%,
Variable (%),
Variable (dot)
Sets the safety zone marker area size.
[Variable (%)]: The grayed out [Rate (%)] becomes active.
[Variable (dot)]: The grayed out [Width (dot)] and [Height (dot)] become
active.
Rate (%)
50 to 100 (
80
)
When [Area Size] [Variable (%)]
Move the slider to set the displayed marker area size without changing the
aspect ratio in 1 % increments.
Width (dot)
360 to 4096 (
3276
)
When [Area Size] [Variable (dot)]
Move the slider to set the area width in 2 dot increment.
Height (dot)
240 to 2160 (
1728
)
When [Area Size] [Variable (dot)]
Move the slider to set the area height in 2 dot increment.
