Canon DP-V2411, Инструкция по эксплуатации

Страница: 52 / 119

OSD Menu
52
Channel Settings
This menu is used for input related settings. Select the [Select Channel] and choose a channel number from CH1 to
CH20. Finally define the parameter of each of the [Channel Settings].

"Supported Signal Format" ( 86)
Sub Menu Setting Options
Select Channel
1
CH1 to CH20 Display the channel number. In addition, you can assign each content of
[Channel Settings] to each channel (
31).
Input Configuration 12-3G/HD-SDI
3G-SDI RAW
SD-SDI
HDMI
— (Not set) Select the input. Factory default depend on the channel ( 31).
Select Input Signal
2
Automatic
Quad Input
Dual Input A,B
Dual Input C,D
Single Input A
Single Input B
Single Input C
Single Input D Sets the signal display method ( 16).
[Automatic]: The display method is automatically determined to match the
input signal.
[Quad Input]: Four input signals (Input A to Input D terminals) are
displayed.
[Dual Input A,B]: Two input signals (Input A terminal and Input B terminal)
are displayed.
[Dual Input C,D]: Two input signals (Input C terminal and Input D terminal)
are displayed.
[Single Input A], [Single Input B], [Single Input C], [Single Input D]: One
input signal (any of Input A to Input D) is displayed.