Canon CLC5151, Руководство по отправке факсов

Страница: 408 / 476

When Problems Occur 13-4
13
T
roub
lesh
oot
ing
Document cannot be sent (if the optional Super G3 FAX Board is installed).
Q Is the telephone line type set correctly?
A Check the type of telephone line that has been set. (See "Selecting the Type of Telephone
Line," on p. 1-15.)
Q If you are sending with a subaddress setting, did you enter the correct subaddress and
password for the destination?
A Check the subaddress and password settings.
Q Is the line connected to a private branch exchange switchboard or terminal adapter?
A Set Check Dial Tone Before Sending in TX Settings under <Fax Settings> in
Communications Settings (from the Additional Functions screen) to 'Off'. (See Chapter 9,
"Setting/Storing the Communications Settings.")
Memory is full.
Q Are unwanted documents stored in memory?
A Check the TX Document and RX Document memory, and erase unnecessary documents
and documents with errors from memory. (See "Erasing Received Documents," on p. 6-8,
and Chapter 2, "Introduction to the Mail Box Functions," in the
Copying and Mail Box Guide .)
The document does not print clearly on the remote machine.
Q Is the platen glass clean?
A Use your machine to make a copy of the document, and check it for streaks. If streaks
appear, clean the platen glass. (See Chapter 7, "Routine Maintenance," in the
Reference
Guide .)