Canon CLC5151, Руководство по отправке факсов

Страница: 114 / 476

Scan Settings 3-8
3
Bas
ic Sc
an
n
ing
F
e
atu
res
Document Size
You can manually specify the document size when the machine cannot detect the paper
size automatically, such as when scanning transparencies. Specify the document size as
well, if you want to scan an A3 original with an image that extends all the way to the edges
without the periphery of the original being cut off. You can also store the specified
document size.
IMPORTANT
•
You cannot select [Auto] when scanning the following types of originals. Specify the size of these
documents manually.
- Nonstandard size originals
- Highly transparent originals, such as transparencies
- Originals with an extremely dark background
- Originals smaller than A5 in size
•
If you are sending a fax in the Direct Sending or Manual Sending mode, and you place your originals
into the feeder, the Document Size Select setting that you specify will be disabled.
•
If the original is placed in the feeder, you cannot scan by selecting [Other Size] in Document Size Select.
•
If you select [Long Strip Original], place your originals into the feeder. You cannot specify the size of a
long strip original that is placed on the platen glass.
•
If [Long Strip Original] is selected as the document size, documents can be sent only at a zoom ratio of
100%.
•
If you select [Other Size] in Document Size Select, you cannot select [Stamp].
NOTE
•
If you scan a registered document size, the scanned image is not rotated automatically.
•
To cancel the scan settings, press the Scan Settings drop-down list
➞
press [Option]
➞
[Cancel].