On-Screen Manual
>
Scanning Guide
>
Troubleshooting
>
Installation Problems
> The Found New Hardware Wizard or
Add Hardware Wizard screen appears when the scanner is connected to a computer
The Found New Hardware Wizard or Add Hardware Wizard
screen appears when the scanner is connected to a computer
Check: The machine may have been connected before installing the
software programs from the
Setup CD-ROM
.
Disconnect the USB cable from the computer, then click Cancel in the Found New Hardware Wizard or
Add Hardware Wizard screen to close it. Then install the software programs from the
Setup CD-ROM
.
Page top
Sayfa 230 / 268 sayfa
The Found New Hardware Wizard or Add Hardware Wizard screen appears ...