manualshive.com logo in svg

Canon 3175 Series, Руководство пользователя, Страница: 17 / 474

Поделиться
Скачать
Canon 3175 Series Скачать руководство пользователя страница 17

xvi

Preface

LASER CLASS 3170 Series.
CFYA/YAH/YAN  120v US V1.0

Laser Safety

This fax complies with 21 CFR Chapter 1 Subchapter J as a Class 1 laser
product under the U.S. Department of Health and Human Services
(DHHS) Radiation Performance Standard according to the Radiation
Control for Health and Safety Act of 1968. This means that the fax does
not produce hazardous radiation.

Since radiation emitted inside the fax is completely confined within
protective housings and external covers, the laser beam cannot escape
from the machine during any phase of user operation.

CDRH Regulations

The Center for Devices and Radiological Health (CDRH) of the U.S. Food
and Drug Administration implemented regulations for laser products on
August 2, 1976. These regulations apply to laser products manufactured
from August 1, 1976. Compliance is mandatory for products marketed in
the United States.

USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED IN THIS USER’S
GUIDE MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

The label is attached to the laser scanner unit inside the fax and is not in
a user access area.

Содержание 3175 Series



























































































































































































































































































































































































































































































Отзывы:

Нет отзывов