Camera and Picture Control
Various Settings and [Performance Check]
Camera and Picture Control Recording onto the Hard Disk Playback the Recorded Files
CONSOLE Windows
4-33
2 [Line Select]
You can select the image-scanning mode of the waveform monitor and the vector scope.
A line on the preview will be displayed in the line mode. You can drag up/down the line with the
mouse to select a scan line.
3 [Display]
You can display and hide the waveform monitor and the vector scope.
4 Waveform monitor
A waveform of the preview picture is displayed.
5 Scale
You can select the scale of the waveform monitor.
1
Switches over between the line and full scan mode.
2
Displays the selected line number.
3
Selects a number of lines used in the line mode.
[IRE]:
-40 IRE - +140 IRE
[Voltage 1]: -0.3V - +1.0V
[Voltage 2]: 0V - +1.3V
1
2
3
A line for
scanning
6 [Wave Mode]
You can select the display mode of the waveform monitor. In the PARADE mode, the waveform
monitor will be tri-partitioned.
7 Vector scope
Displays the color information of [Rec Viewer]. Depending on the recording standards, the panel
changes automatically.
[Composite]: Displays a luminance and color-difference signal
[Y]:
Displays the luminance signal
[YUV]:
Displays the luminance signal, the blue differential signal, and the red differential
signal in PARADE mode.
[RGB]:
Displays RGB signals in the PARADE mode in the R, G, B order.