Preparation (Installation, Connection, Launch, Activation)
1-10
Activation
You can use all of the functions of this software after registering the license key. During the trial
period, you can start CONSOLE 50 times limited to within 14 days.
During the trial period, the following limitations apply to CONSOLE.
- You can operate CONSOLE for 120 minutes only.
- You can record for 5 minutes only.
- You cannot export or load Custom Preset files.
Purchasing the License Key
• For details about purchasing and receiving the license key, please visit the Canon’s download site.
• You can use the same license key you have already purchased for CONSOLE 1.0 if you are
installing CONSOLE 1.1 to a computer in which CONSOLE has not been installed previously.
• You do not need to register the license key again if you are installing CONSOLE 1.1 to a computer in
which CONSOLE 1.0 had already been run. The license key information will be carried on
automatically.
1
Set the camcorder’s recording program to EXT.CONT. or Camera mode
and connect the camcorder to the computer. (
1-8)
2
Start CONSOLE.
3
Click [Register] in the trial
confirmation window.
If you are already running the software,
select [Version] [About CONSOLE]
and
click the [Register] button.
Registering the License Key
4
Confirm and note the product ID.
If an appropriate camcorder is not connected to the computer, the product ID will not be
displayed.
5
Visit the Canon’s download site where you downloaded the trial
version software and follow the instructions on the site to purchase
the license key.
You will need the product ID obtained in the step above to purchase the license key.
6
Receive the license key.
1
Set the camcorder’s recording program to EXT.CONT. or Camera mode
and connect the camcorder to the computer. (
1-8)
Connect the same camcorder as the one used for receiving the license key.
2
Start CONSOLE.
Product ID
