28
29
130729.PDF
Rear Travel Modes
(remote DYAD ever selectable)
FLOW - 95 mm, ELEVATE - 160 mm
Headset
Cannondale Si (see also Replacement Parts for conversion kits)
Chainline
50 mm
BB Shell Width
BB30 73 mm
Seat Post Diameter
31.6mm
Front Derailleur
S3 Direct Mount, Bottom pull
Dropout Spacing
142mm (convertible to 135mm)
Rear Brake
Post Mount Adapters - 160/180/185/203
WARNING
Please read your
Cannondale Bicycle Owner’s Manual
for more
information on the following specifications:
Intended Use
ASTM Condition 4, All-Mountain, OverMountain
Maximum Tire Width
27.5 X 2.5 In
Maximum Fork Length
545 mm
Minimum Seat Post Insert
100 mm
Maximum Weight Limit (Lbs/Kg)
*(Seat Bag Only)
RIDER
LUGGAGE*
TOTAL
300 / 136
5 / 2.3
305 / 138
Service Tool -
KP169/
The service tool
KP169/
(shown below) is available to properly service the various links, bearings, and pivot
axles. The tool is available through your Cannondale Dealer. The kit is supplied with instructions and an
overview of its use is shown in this supplement.
PRESS
DRIVER
BEARING TOOLS
HARDWARE
Tightening Torques
T30
Loctite 242 (blue)
10 Nm (88.5 InLbs)
2.5mm
Loctite 242 (blue)
2.5 Nm ( 22.0 InLbs)
4mm
Loctite 242 (blue)
4 Nm (35 InLbs)
4mm
Loctite 242 (blue)
5 Nm (44 InLbs)
PIVOT AXLE PINCH BOLTS
FD ADAPTER
5mm
Loctite 242 (blue)
7 Nm (62 InLbs)
PIVOT AXLE
RD HANGER
BRAKE ADAPTER
PIVOT CAP
4mm
Loctite 242 (blue)
3 Nm (26.5.5 InLbs)
SHOCK BOLTS
5mm
Loctite 242 (blue)
8 Nm (71 InLbs)
CAGE MOUNTING BOLTS
Grease
3 Nm (26.5 InLbs)
Cable Clamps
4mm
Loctite 242 (blue)
3 Nm (26.5.5 InLbs)
Correct tightening torque for the fasteners (bolts, screws, nuts) on your bicycle is very important to your
safety, the durability and performance of your bicycle. We urge you to have your Dealer correctly torque all
fasteners using a torque wrench. If you decide to tighten fasteners yourself always use a good torque wrench!
Specifications
EN
